Take your time to read instructions before taking this test.

There are 40 questions which you are to answer in 15 minutes that gives you roughly 30 seconds per question.

If you can get at least 60%, you can be rest assured that you’ll ace MEE 204 exam

PS

In a normal exam you will be asked between 40 – 60 questions but I only arranged 40 questions

Note

  • Do not be in a hurry to answer the questions
  • Do not waste time on a question you don’t know
  • Move as fast as possible and starting with questions that don’t have calculation first to save time
  • Always crosscheck
  • Don’t be in a hurry to submit, you are not in a competition
  • Don’t be scared. Getting an A is easy
  • Don’t be over confident, you can end up a D, E or F. Calm your blood, no be only you sabi book
  • Please do well to use our comment box incase there’s a message you want to pass to us

70 – 100 A

60 – 69 B

50 – 59 C

45 – 49 D

40 – 44 E

0 – 39 F

I wish you success

Please do well to use our comment box incase there’s a message you want to pass to us

Want to stay updated with exam info, materials, and more practice resources?

Join the UNDERGRAGRA WhatsApp Channel now!

Here’s the link: https://whatsapp.com/channel/0029VakX28dFi8xdORrhjI34

Telegram Channel

T.me/ugchannel

Kindly join us on all our social media platform using this link ⏩ https://t.co/Tk9d5HFJXG

Join Our General 200 Level Whatsapp Group

https://chat.whatsapp.com/CR3L5APyRwoJw9MEjO9o1m

Thank you!.

Keep pushing, stay focused, and good luck on your exams. You’ve got this!

I remain your favorite education blogger

❤️ Undergragra

MEE 204

1 / 40

1. Drilling is done to produce

2 / 40

2. The term “ferrous metal” refers to metals containing

3 / 40

3. Primary goal of workshop safety is to

4 / 40

4. Heating metal and quenching in water or oil refers to

5 / 40

5. Heat treatment is defined as

6 / 40

6. Sand casting involves

7 / 40

7. Common lathe operation for reducing diameter is

8 / 40

8. Safety goggles protect

9 / 40

9. First step before any workshop operation is

10 / 40

10. Soldering requires

11 / 40

11. Soaking time normally allowed for 10mm thick metal piece is

12 / 40

12. Process that produces equilibrium conditions is

13 / 40

13. Mild steel is mainly composed of

14 / 40

14. Shield used in welding protects the operator from

15 / 40

15. Center punch is used to

16 / 40

16. The most suitable file for curved surface is

17 / 40

17. Foundry process begins with

18 / 40

18. Heat treatment process used to refine grain structure of steel is

19 / 40

19. Type of surface hardening process is

20 / 40

20. Structure formed when steel is heated to about 723°C is

21 / 40

21. Tapping creates

22 / 40

22. Heat treatment done to relieve strain and stress is

23 / 40

23. Various types of heat treatment processes include

24 / 40

24. Hacksaw is primarily used for

25 / 40

25. Machine used to finish surfaces to high accuracy is

26 / 40

26. Spindle speed is controlled on a lathe by

27 / 40

27. The lathe machine performs

28 / 40

28. Forging is a process that uses

29 / 40

29. Suitable nitriding method for all alloyed and unalloyed steels is

30 / 40

30. Blowtorch is used for

31 / 40

31. Butt joint is a type of

32 / 40

32. Lathe machine bed is usually made of

33 / 40

33. Hand tap set consists of

34 / 40

34. Suitable nitriding method for all alloyed and unalloyed steels is

35 / 40

35. The chuck used to hold drill bits is called

36 / 40

36. Annealing is a heat treatment that

37 / 40

37. The purpose of coolant during machining is to

38 / 40

38. The tailstock in a lathe supports

39 / 40

39. Arc welding uses

40 / 40

40. Welding defect due to insufficient heat is

Your score is

The average score is 58%

0%

 

Related posts:

  1. MBC 201 CBT PRACTICE TEST
  2. FUOYE FIN 102 CBT Practice
  3. FUOYE MAC 214 CBT Practice
  4. FUOYE PCS 106 CBT Practice