MEE 203 CBT Practice

Table of Contents

📘 MEE 203 PRACTICE TEST – IMPORTANT INSTRUCTIONS

Take your time to read the instructions carefully before starting this test.

📝 Test Details

Total Questions: 40 questions

Time Allowed: 15 – 20 minutes

This gives you very few seconds per question, so manage your time wisely.

✅ If you can score at least 60%, you can be rest assured that you’ll ace MEE 203 in the real exam.

PS:

In the actual GST exam, you’ll likely be asked between 40 – 60 questions.

⚠️ EXAM STRATEGY & TIPS

Do not rush into answering questions.
Don’t waste too much time on questions you don’t know — skip and move on.
Start with questions that don’t involve calculations to save time.
Always crosscheck your answers.
Don’t be in a hurry to submit — you’re not in a competition.
Don’t be scared — getting an A is very achievable.
Don’t be overconfident either — calm your blood, no be only you sabi book 😌.
If you have any complaints, corrections, or feedback, please use the comment box.

📊 GRADING SCALE

70 – 100 → A

60 – 69 → B

50 – 59 → C

45 – 49 → D

40 – 44 → E

0 – 39 → F

📢 SUPPORT OUR PLATFORM (IMPORTANT)

🔔 Support Undergragra

Ads on this page help us keep MCQs, PDFs, and practice tests FREE for you.

Kindly click the support link below — it helps us serve you better. 🙏

👇https://www.effectivegatecpm.com/mckv0s1rd?key=0209a42b6c7a02bb518d8a5eccc74dc7

(You may be redirected briefly, then return to continue your test.)

🔗 JOIN OUR FUOYE COMMUNITIES

📌 FUOYE Student Community

https://chat.whatsapp.com/EPa2JS5d8KFKRksbVEFu06

📌 FUOYE Freshers WhatsApp Group

https://chat.whatsapp.com/C34ZbwhHidEIqENU9UcJT

📌 FUOYE 200 Level IPTS Group

https://chat.whatsapp.com/Ej9eHZ1xUrW2UD7HBJkODb

📌 FUOYE 100 Level IPTS Group

https://chat.whatsapp.com/JoBPim7X7gvCrTpmEgiDIh

📡 JOIN UNDERGRAGRA CAMPUS UPDATE CHANNEL

📲 WhatsApp Channel

https://whatsapp.com/channel/0029VakX28dFi8xdORrhjI34

📡 Telegram Channel

https://t.me/ugchannel

❤️ Undergragra

Pos.	Name	Score	Duration
1	Solosam	76.5 %	13 minutes 14 seconds
2	Chris	65.17 %	7 minutes 13 seconds
3	Anthony Regina	65 %	11 minutes 49 seconds
4	George	63 %	11 minutes 24 seconds
5	Abiodun Joy Moyinoluwa	3 %	2 minutes 27 seconds
6	itunuoluwa	0 %	27 minutes 17 seconds

MEE 203(Applied Mechanics)

1 / 40

1. A body of mass 10 kg is acted upon by a force of 50 N. The acceleration produced is __________.

(Take g = 10 m/s²)

A. 50 m/s²

B. 5 m/s²

C. 10 m/s²

D. 2 m/s²

2 / 40

2. Which of the following is the characteristic of force?

A. Point of application of force

B. Direction of application of force

C. Magnitude of force

D. All of the mentioned

3 / 40

3. Which of the following is a branch of mechanics?

A. Statics and kinetics

B. Kinetics and kinematics

C. Statics and dynamics

D. Kinematics and dynamics

4 / 40

4. Which of the following type of screws is used in the machines?

A. Round-threaded

B. Rectangle-threaded

C. Helical-threaded

D. Square-threaded

5 / 40

5. When can two forces be in equilibrium?

A. They are collinear

B. All of the mentioned

C. They are equal in magnitude

D. They are opposite in direction

6 / 40

6. Frictional force always acts __________ to the direction of motion or tendency of motion.

A. Perpendicular

B. Opposite

C. Along the normal reaction

D. Parallel

7 / 40

7. A load of 200 N is lifted vertically through a height of 5 m. The work done is __________.

A. 1000 J

B. 200 J

C. 40 J

D. 500 J

8 / 40

8. Two forces of 30 N and 40 N act at right angles to each other. The resultant force is __________.

A. 60 N

B. 70 N

C. 80 N

D. 50 N

9 / 40

9. Which of the following is a feature of friction?

A. Not a self-adjusting force

B. Always acts in the direction opposite to the applied force

C. It is an active force

D. Always acts in the direction of applied force

10 / 40

10. When there is no relative force between touching surfaces, which of the following force is developed?

A. Dynamic friction

B. Fluid friction

C. Static friction

D. Dry friction

11 / 40

11. Which of the following is the characteristic of force?

A. Direction of application of force

B. All of the mentioned

C. Point of application of force

D. Magnitude of force

12 / 40

12. The internal force in structures among the following is?

A. Compression force

B. Bending force

C. Gravity force

D. Impact force

13 / 40

13. What is the relationship between each force, if three concurrent forces acting on a body according to Lami’s theorem?

A. Directly proportional to the sine of the angle between the other two forces

B. Inversely proportional to the sine of the angle between the other two forces

C. Inversely proportional to the cosine of the angle between the other two forces

D. Directly proportional to the cosine of the angle between the other two forces

14 / 40

14. Which of the following is the basic law for mechanics?

A. Newton’s laws of motion

B. Parallelogram law

C. Newton’s law of viscosity

D. Hooke’s law

15 / 40

15. What is the the effect of a force upon a body according to the principle of transmissibility of forces?

A. Maximum when acting at the body’s centre of gravity

B. Different at various locations along its line of action

C. The same at all points along its line of action

D. Minimum when acting at the body’s centre of gravity

16 / 40

16. The point through which the resultant of a distributed force system acts is called the __________.

A. Centre of mass

B. Neutral axis

C. Centre of pressure

D. Centre of gravity

17 / 40

17. Which of the following conditions doesn’t affect the magnitude of the moment?

A. If the resultant is maximal

B. If the point of application of force is opposing the line of action

C. If the moment of centre is shifted along a line perpendicular to the line of action

D. If the point of application of force is along the line of action

18 / 40

18. A force of 20 N acts at a perpendicular distance of 0.5 m from a pivot. The moment of the force about the pivot is __________.

A. 20 Nm

B. 30 Nm

C. 5 Nm

D. 10 Nm

19 / 40

19. n the journal bearings calculations, the moment is the cross product of which of the following two vectors?

A. Force and Radius scalars

B. Radius and Force scalars

C. Radius and Force vectors

D. Force and Radius vectors

20 / 40

20. According to which of the following laws of mechanics a body remains/continue in its state of rest or motion until it is disturbed by an external agent?

A. Newton’s third law of motion

B. Newton’s first law of motion

C. Newton’s second law of motion

D. Superposition law

21 / 40

21. What is a free-body diagram?

A. It’s a sketch of an undisturbed body that shows external forces of the body

B. It’s a sketch of a body in motion that shows bending forces of the body

C. It’s a sketch of an isolated body that shows external forces of the body and reaction forces

D. It’s a sketch of a moving body that shows internal forces of the body and reaction forces

22 / 40

22. The change in the moment is equal to which of the following?

A. Rotational moment

B. Bending moment

C. Area under the shear diagram

D. Total weight

23 / 40

23. Which of the following is the condition for the three-force theorem in mechanics?

A. The system should be co-planar, parallel

B. The force system should be in equilibrium, co-planar, concurrent, or parallel

C. The force systems should be non-coplanar

D. The force system should be in equilibrium only

24 / 40

24. Over a block of weight W, the theory of friction is described. Which of the following describes the surface on which of the following block is located?

A. Having density in negative

B. Non-rigid

C. Coloured red

D. The motion of that block is always horizontal

25 / 40

25. When the surfaces of two bodies come in contact, there is a limited amount of resistance to sliding between them, which is known as _________

A. Internal forces

B. Attraction force

C. Friction

D. Lubrication

26 / 40

26. Which of the following is a vector quantity?

A. Acceleration

B. Mass

C. Volume

D. Density

27 / 40

27. The law stating that action and reaction are equal and opposite is known as __________.

A. Newton’s First Law

B. Law of Gravitation

C. Newton’s Second Law

D. Newton’s Third Law

28 / 40

28. Which of the following is valid if two forces are represented by two sides of a triangle in order?

A. The resultant of two forces is represented by the third side in the same sequence

B. The resultant’s magnitude is greatest

C. The resultant’s magnitude is zero

D. The resultant of two forces is represented by the third side in reverse order

29 / 40

29. The moment is the cross product of which of the following two vectors/scalars?

A. Force and Radius vectors

B. Radius and Force scalars

C. Radius and Force vectors

D. Force and Radius scalars

30 / 40

30. Which of the following statements describes the resultant of two forces?

A. Force that has the highest magnitude in the system

B. Force that maintains the system in equilibrium

C. Force that has the same effect as the two forces

D. Force that has the same effect as one force

31 / 40

31. In the free body diagrams, the normal forces acting on the belt are in which of the following direction for calculating the equilibrium equations?

A. Vertically Upward

B. Vertically Downward

C. Horizontally Left

D. Horizontally Right

32 / 40

32. Which of the following forces do not cause the rotation?

A. Parallel

B. Non-concurrent

C. Non-Parallel

D. Concurrent

33 / 40

33. A couple produces __________.

A. Rotation without translation

B. Neither rotation nor translation

C. Neither rotation nor translation

D. Translation without rotation

34 / 40

34. The moment of the resultant of two concurrent forces to a center in their plane is equal to

A. The difference in component moments with respect to a different centre

B. The algebraic sum of the moments of the components to the same centre

C. The difference between the components moments at the same centre

D. The algebraic sum of the moments of the components to a different centre

35 / 40

35. A machine does 600 J of work in 20 seconds. The power developed is __________.

A. 40 W

B. 60 W

C. 20 W

D. 30 W

36 / 40

36. Which of the following doesn’t affect frictional force?

A. Area of contact

B. Surface roughness

C. Reaction of surface

D. Force tending cause motion

37 / 40

37. Which of the following contains moving parts?

A. Frames

B. Machines

C. Truss

D. Beam

38 / 40

38. What is Kinematics?

A. Branch of dynamics which deals with the study of bodies under motion by considering forces

B. Branch of dynamics which deals with the study of bodies under motion without considering forces

C. Branch of dynamics which deals with the study of bodies at rest

D. Branch of dynamics which deals with the study of bodies under the motion

39 / 40

39. Which part of the truss section is made to employ the method of joints in the free body diagram?

A. The whole structure

B. Truss

C. Combination of joint and the whole structure

D. Joints

40 / 40

40. The force system should be in equilibrium, co-planar, concurrent, or parallel

A. Kg m/s^2

B. Kg m

C. Kg m^2/s

D. Kg m^2

Your score is

MEE 203 CBT Practice

📘 MEE 203 PRACTICE TEST – IMPORTANT INSTRUCTIONS

📝 Test Details

⚠️ EXAM STRATEGY & TIPS

📊 GRADING SCALE

Related Posts

Join Our 25K+ Happy Students​ Today!

Join Our 25K+ Happy Students Today!