Home CBT TEST ENG 205(ENGINEERING) CBT PRACTICE

CBT TEST

ENG 205(ENGINEERING) CBT PRACTICE

Phil

January 11, 2025

Take your time to read instructions before taking this test.

There are 40 questions which you are to answer in 15 minutes that gives you roughly 30 seconds per question.

If you can get at least 60%, you can be rest assured that you’ll ace ENG 205 exam

In a normal exam you will be asked between 40 – 60 questions but I only arranged 40 questions

Note

Do not be in a hurry to answer the questions
Do not waste time on a question you don’t know
Move as fast as possible and starting with questions that don’t have calculation first to save time
Always crosscheck
Don’t be in a hurry to submit, you are not in a competition
Don’t be scared. Getting an A is easy
Don’t be over confident, you can end up a D, E or F. Calm your blood, no be only you sabi book

Please do well to use our comment box incase there’s a message you want to pass to us

70 – 100 A

60 – 69 B

50 – 59 C

45 – 49 D

40 – 44 E

0 – 39 F

I wish you success

Join The General 200 Level Group

https://chat.whatsapp.com/CR3L5APyRwoJw9MEjO9o1m

Join Undergragra Campus Update Channel

Whatsapp: https://whatsapp.com/channel/0029VakX28dFi8xdORrhjI34

Telegram: https://t.me/ugchannel

I remain your favorite education blogger

Undergragra

ENG 205(Engineering)

‎

1 / 40

1. A key principle of sustainable engineering is:

A. Focusing on aesthetic aspects only

B. Avoiding new technologies to reduce risks

C. Prioritizing short-term profits

D. Using resources efficiently while minimizing waste

2 / 40

2. Safety in engineering design is often ensured by:

A. Building a factor of safety into design equations

B. Eliminating safety inspections

C. Reducing project timelines

D. Ignoring potential risks

3 / 40

3. Ethical engineering practice requires engineers to:

A. Focus solely on profitability

B. Avoid teamwork and collaboration

C. Disclose conflicts of interest

D. Prioritize employer demands over safety

4 / 40

4. What is the role of standards in the engineering design process?

A. To provide guidelines for the design and manufacturing processes

B. To facilitate international trade by ensuring product compatibility

C. All the options

D. To ensure that products meet safety and quality requirements

5 / 40

5. Standards are important in engineering because they:

A. Limit innovation and creativity in design

B. Serve as rules to measure or judge capacity, quantity, content, extent, value, and quality

C. Are optional and not mandatory in engineering practice

D. Are optional and not mandatory in engineering practice

6 / 40

6. The primary focus of engineering in society is to:

A. Limit innovation to prevent risks

B. Promote inequality through technology

C. Focus on theoretical models only

D. Provide solutions that improve the quality of life

7 / 40

7. The public provides engineers with education and licensing; in return, engineers have a responsibility to

A. Limit innovation to traditional methods

B. Delegate ethical responsibilities to others

C. Protect the safety and well-being of the public in all design efforts

D. Maximize company profits

8 / 40

8. In engineering practice, 'public safety' refers to:

A. Ensuring that engineering projects are completed on time

B. Maintaining the confidentiality of engineering designs

C. Protecting the well-being of the community through safe and reliable engineering solutions

D. Maximizing profits from engineering projects

9 / 40

9. What is the primary role of an engineer in society?

A. To design and build infrastructure

B. To conduct scientific research

C. To manage financial resources

D. To conduct scientific research

10 / 40

10. The term 'engineering ethics' primarily deals with:

A. Legal regulations in engineering practice

B. Technical standards and specifications

C. Economic aspects of engineering projects

D. Moral principles guiding engineering decisions

11 / 40

11. Which of the following is NOT one of the fundamental codes of ethics for engineers?

A. Perform services in all areas, regardless of competence

B. Issue public statements in an objective and truthful manner

C. Avoid deceptive acts

D. Hold paramount the safety, health, and welfare of the public

12 / 40

12. In the context of design specifications, what does the term 'ergonomic factors' refer to?

A. The environmental impact of a product

B. The aesthetic appeal of a product

C. The comfort and efficiency of the product for human use

D. The cost-effectiveness of the product

13 / 40

13. The concept of 'sustainable development' in engineering emphasizes:

A. Rapid industrialization without environmental concerns

B. Ignoring social impacts of engineering projects

C. Environmental conservation and resource efficiency

D. Short-term economic gains

14 / 40

14. Which of the following is NOT typically included in a Final Design Specification (FDS)?

A. Drawings and dimensions

B. Maintenance requirements

C. Marketing strategies

D. Environmental factors

15 / 40

15. The term 'sustainable engineering' refers to:

A. Engineering solutions that meet present needs without

B. Engineering designs that are aesthetically pleasing

C. Engineering methods that ignore environmental impacts

D. Engineering solutions that meet present needs without compromising future generations

16 / 40

16. According to the American Society of Civil Engineering Code of Ethics, engineers must:

A. Prioritize personal gain over public welfare

B. Focus solely on cost reduction

C. Delegate all safety concerns to contractors

D. Hold public safety, welfare, and health paramount

17 / 40

17. Which document outlines the ethical guidelines for engineers?

A. National Engineering Ethics Code

B. Engineering Code of Conduct

C. Engineering Ethics Manual

D. Professional Engineers Act

18 / 40

18. Quality designs and construction practices in engineering are imperative to:

A. Enhance public safety and welfare

B. Quality designs and construction practices in engineering are imperative to:

C. Limit the use of new technologies

D. Reduce collaboration among professionals

19 / 40

19. An engineer may lose their license if they:

A. Engage in continuous professional development

B. Report safety violations

C. Comply with the Engineering Code of Practice

D. Fail to adhere to the Engineering Code of Practice

20 / 40

20. Which of the following is an example of an ethical dilemma an engineer might face?

A. Collaborating with a team of engineers from different disciplines Answer

B. Selecting the most cost-effective material for a project

C. Deciding whether to disclose a potential safety hazard in a project

D. Choosing between two equally effective design solutions

21 / 40

21. The International Standards Organization (ISO) coordinates standards worldwide. Which organization represents the U.S. in ISO?

A. American Society of Civil Engineers (ASCE)

B. American Institute of Steel Construction (AISC)

C. American Society for Testing and Materials (ASTM)

D. American National Standards Institute (ANSI)

22 / 40

22. Which of the following is a challenge engineers face in society?

A. Ignoring environmental concerns

B. Maintaining traditional methods without change

C. Focusing solely on technical aspects without considering societal impacts

D. Balancing innovation with safety

23 / 40

23. Preparation of standards relating to products, measurements, materials, and processes

A. Certification of industrial products

B. All the options

C. Preparation of standards relating to products, measurements, materials, and processes

D. Assistance in the production of quality goods

24 / 40

24. Engineers contribute to national development by:

A. Focusing only on theoretical research

B. Designing and implementing infrastructure projects

C. Limiting community participation

D. Avoiding technological advancements

25 / 40

25. Which of the following is an example of a standard-issuing organization?

A. American Institute of Steel Construction (AISC)

B. American Society of Mechanical Engineers (ASME)

C. American Society for Testing and Materials (ASTM)

D. All the options

26 / 40

26. The concept of 'corporate social responsibility' in engineering involves:

A. Focusing solely on profit generation

B. Ignoring environmental regulations

C. Limiting community engagement to marketing purposes

D. Companies taking responsibility for the social and environmental impacts of their operations

27 / 40

27. In the context of engineering ethics, 'conflict of interest' refers to:

A. Engineers engaging in continuous professional development

B. Engineers prioritizing personal interests over professional duties

C. Engineers working in different industries

D. Engineers collaborating with competitors

28 / 40

28. The collapse of buildings and environmental degradation highlight the importance of:

A. Engineers' responsibility for public safety

B. Reducing engineering education requirements

C. Limiting the use of safety factors in design

D. Increasing construction speeds

29 / 40

29. Adhering to professional codes and standards helps engineers:

A. Limit their professional growth

B. Avoid collaboration with other professionals

C. Increase public confidence in the profession

D. Focus only on technical aspects, ignoring societal impacts

30 / 40

30. Which of the following is a fundamental principle of engineering ethics?

A. Engineers should act with integrity and honesty

B. Engineers should prioritize personal gain over public welfare

C. Engineers should focus solely on technical aspects, ignoring societal impacts

D. Engineers should avoid collaboration with other professionals

31 / 40

31. The role of engineers in environmental protection includes:

A. Focusing only on industrial growth

B. Ignoring climate change concerns

C. Reducing costs without considering environmental impacts

D. Developing technologies that reduce pollution

32 / 40

32. The practice of 'green engineering' aims to:

A. Reduce environmental impact of engineering processes

B. Lower production costs

C. Increase production efficiency

D. Enhance product aesthetics

33 / 40

33. Which of the following is NOT typically considered when developing a design specification?

A. Environmental factors

B. Aesthetic factors

C. Personal preferences of the design team

D. Required dimensions

34 / 40

34. Engineers have a responsibility to:

A. Avoid reporting unethical practices of peers

B. Enhance the reputation of the profession through ethical conduct

C. Ignore environmental concerns in their designs

D. Prioritize employer demands over public safety

35 / 40

35. Which of the following is a key ethical responsibility of engineers?

A. Promoting personal interests over public good

B. Avoiding collaboration with other professionals

C. Maximizing profits for their companies

D. Ensuring public safety and well-being

36 / 40

36. ‍Which of the following is a responsibility of engineers towards the public?

A. To avoid engaging with the community

B. To prioritize company profits over public safety

C. To provide accurate and honest information about their work

D. To ensure the confidentiality of company secrets

37 / 40

37. ‍Which of the following is an example of a social impact of engineering?

A. Development of renewable energy sources

B. Design of luxury consumer products

C. Improvement of manufacturing processes

D. Creation of new software applications

38 / 40

38. What is the primary purpose of the Engineering Code of Practice?

A. To increase engineers' salaries

B. To promote competition among engineers

C. To limit engineers' creativity

D. To help engineers comply with legal obligations, safety standards, and professional duties

39 / 40

39. What is the primary purpose of a design specification?

A. To outline the marketing strategy for a product

B. To determine the pricing strategy for a product

C. To provide a detailed list of requirements for a product or process

D. To establish the sales targets for a product

40 / 40

40. Which organization is the apex standardization body in Nigeria?

A. Standards Organisation of Nigeria (SON)

B. International Organization for Standardization (ISO)

C. American National Standards Institute (ANSI)

D. British Standards Institution (BSI)

Your score is

The average score is 59%

ENG 205(ENGINEERING) CBT PRACTICE

Recent Posts

NYSC Edo State Punishes Corps Members with Service Extension Over Complaints...

NYSC WhatsApp Group Link 2025|Join Now

Social Media Manager, Content Creator and Web Designer(WordPress) Needed at Softhills...

Social Media Manager Needed at Crossover Restaurant

Entry Level Food Scientist Needed at The Place

Follow us on Instagram @undergragra_official

EVEN MORE NEWS